Revive, Repair Huawei that is bricked in an easy way

YOU MAY ALSO BE INTERESTED IN: REVIVE HUAWEI FROM DLOAD

In this guide I will using as an example the Huawei Ascend G510 also known as Emotion, which is one of Huawei's mid-low range terminals, which had become very popular in our country, so there are still many of these around.

This model Huawei Ascend G510 despite being relatively durable, suffers from some software and hardware problems that make us from time to time to resort to a flashing to its original firmware.

For example, this is useful if the phone is slow, or is getting bugs with Google appsIf you want to make a clean slate for example because you are going to give the phone to someone else, or simply if you want to make a clean slate.

To flash the Huawei Ascend G510, the steps are as follows could not be simplerwe will not require USB debuggingor enter Fastboot mode or traditional methods that we use on other Android phones, because Huawei has made it very easy for us to do the process, so let's go through the steps:

Flashing the Huawei Ascend G510

1. If you still have access to your phone, be sure to make a backup of everything you don't want to lose, because this process will erase everything.
2. Charge the battery as much as possible, at least above 50%.
3. Visit Huawei's official website and download the firmware for your phone model, in my case I'm with the Huawei Ascend G510 so this would be the link.
4. In Windows unzip the file The downloaded zipped file, and copy the unzipped contents to the root of a microSD memory stick.
5. Turn off your Huawei Ascend G510 or the model you are using.
6. Remove the battery for at least 10 seconds and put it back. Then insert the microSD memory into the phone.
7. To start flashing, on the Huawei Ascend G510, you just need to simultaneously press volume up, volume down and power button for a couple of seconds. Then the phone will start up, but on the update screen.
8. The upgrade process may take about 10 minutes so be patient.
9. That's all there is to it.

If when pressing the three buttons in point 7 of this guide, you have obtained an error message like the one shown in the following image (this has been my case on a test phone), it means that the terminal internal memory is faulty and has been left in read-only mode. When this happens, the phone is practically unusable because it no longer has the capacity to store new information, so it will no longer be possible to fix it, and the best thing to do is to replace it with a new one.

DOWNLOAD RESOURCES:

ROM HUAWEI PAY G MINI 4.4.2
adb fasboot
 drivers and huawei extractor
 OTHER MODELS FROM THE OFFICIAL WEBSITE
ALTERNATIVE PAGE FOR OTHER ROMS

VIDEO TUTORIAL: